Lijsten Ender 3 Z Axis Not Moving Down

Lijsten Ender 3 Z Axis Not Moving Down. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

Hier Comments For Ender 3 Lead Screw Stabilizer By Elmerohueso Thingiverse

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. Not possible to move down anymore. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

Not possible to move down anymore.. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. Not possible to move down anymore.

Not possible to move down anymore.. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. Not possible to move down anymore.. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position... I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore.. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

Not possible to move down anymore. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore.. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

Not possible to move down anymore... . For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

Not possible to move down anymore. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad... I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. Not possible to move down anymore. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.. Not possible to move down anymore.

Not possible to move down anymore.. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore. Not possible to move down anymore.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case... .. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

Not possible to move down anymore... I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad... Not possible to move down anymore.. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. Not possible to move down anymore.. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position... I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore.. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

Not possible to move down anymore. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position... I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad... Not possible to move down anymore.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. Not possible to move down anymore. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case... Not possible to move down anymore.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore. Not possible to move down anymore.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore... I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case... I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

Not possible to move down anymore... Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad... I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad... Not possible to move down anymore.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. . I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

Not possible to move down anymore... Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position... For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. Not possible to move down anymore.. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.. Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. Not possible to move down anymore. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad... I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad... Not possible to move down anymore.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position... Not possible to move down anymore.. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

Not possible to move down anymore. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case... I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad... I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad... Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position... For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad... For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. .. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.

Not possible to move down anymore. Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.. Not possible to move down anymore.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad... For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

Not possible to move down anymore. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

Not possible to move down anymore. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position... I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. Not possible to move down anymore. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad. I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. Not possible to move down anymore.. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.

I had this problem on my y axis and took me a while to realize the endstop was stuck in a closed loop position. For anyone who may have this problem in the future and do have all the cables plugged in, your end stop could be bad.. I've found multiple other posts where people have the same issue but currently there is no resolution for my specific case.